Note that no direct clock offset has been made yet. Now, if you also set the fan to 100%, the card will hit as high as 1910 MHz. Without turning on the OC Mode, the card can easily go up to 1700 MHz, which is more than the listed boost clock rate.Īnd if you turn the OC Mode on and only raise the power to the maximum limit (120% in this case), the boost clock rate will go up to 1890 MHz. The Asus GTX1080Ti (also a Pascal card) lists a boost clock of 1683 MHz and 1780 MHz in its OC Mode. And as long as the GPU is not limited by power or heat, it will continue to boost the clock. Pascal also introduced the GPU Boost 3, which, if you really consider it, also overclocks the GPU. If you really want to increase the temperature, you will have to physically modify your card. With Maxwell, you couldn’t adjust the core voltage of the GPU, and with Pascal, it’s almost impossible to provide too much voltage to the core. Since the introduction of Pascal (the GPU architecture that powers the 1060), it has become really hard to burn your Nvidia graphics card when performing basic overclocking. Generally, you can increase the VRAM clocks more than you can increase the core, but a significant increase in the latter can also cause the system to crash instantly.īut overclocking the card is not that simple, and to better understand how you can do it, let’s get a few things out of the way first. If it stays stable for around 10 minutes, increase the clock by 10-25 MHz and run the tests again. To overclock the GTX 1060, start by increasing the VRAM and GPU by a small amount, like 50 MHz, and do a stress test using software like Furmark.
0 Comments
Leave a Reply. |